
DLight: UV Blocking Plastic Coating
CARPRO
Envio Rapido
Get long-lasting UV protection with CARPRO 's CQUARTZ DLight . This innovative ceramic coating is designed to protect your headlights, paint protection film (PPF), and plastics from the harshest UV rays. With DLight , you can ensure your vehicle maintains its pristine appearance, no matter the environment.
-
Unmatched UV Protection: Our cutting-edge formula combines advanced UV absorbers and light stabilizers to effectively block harmful UVA and UVB rays across the 260nm to 360nm spectrum. Protects against yellowing, fading, and cracking for a pristine, long-lasting appearance.
-
Long-lasting durability: Enjoy up to 3 years of powerful UV protection. DLight not only preserves clarity, but also maintains brightness and prevents fading, ensuring your surfaces stay vibrant.
-
Clear Finish: Designed to enhance the beauty of your vehicle, DLight provides a stunning, clear finish that revitalizes headlights and plastic trim.
-
Simple Application: With an easy-to-follow application process, achieving professional-quality results has never been easier.
-
Versatile topcoat option: Use DLight as a topcoat over existing coatings to amplify UV protection and durability, especially in hot climates and with high UV exposure.
Surfaces where it is used:
- Plastics
- PPF (paint protection film)
- Headlights
- Paint
Instructions :
- Plastics :
-
- work in cold and shaded areas.
- Clean the part you want to protect. We recommend a multipurpose cleaner such as Multi X or Multi Clean . If you need more power, use ReTyre .
- After cleaning the area, use Eraser to remove any cleaner residue. Wait approximately 15 minutes after applying Eraser before applying DLight .
- Apply DLight with the applicator that comes with the Kit or you can also use a microfiber applicator.
- On textured plastics, it's not necessary to remove the excess. Just apply evenly. On smooth plastics, it is necessary to remove the excess, possibly leaving a thinner layer for this reason.
- We recommend two coats on plastics. In our warm environment, you can wait 30 minutes between coats.
-
PPF
- Work in a cool, shaded area.
- After cleaning the area, use Eraser to remove any residue from cleaners and oils.
- First, apply two lines of the applicator to the PPF, spreading it over an area approximately 12" x 12". This way, you can see how DLight responds to the PPF and the environment (heat and humidity).
- You can wait approximately 2 to 10 minutes before removing. This varies depending on the material, temperature, and humidity of the environment.
- We recommend applying two coats, you can wait at least 30 minutes between coats.
- Work in a cool, shaded area.
- Headlights
-
- Work in the shade and ensure the surface is not hot.
- We recommend removing any oxidation from the headlights. At the very least, you can polish them with a soft or fine polish. Like CARPRO Reflect .
- Use Eraser to remove any residue from cleansers and oils.
- Apply DLight with the applicator included in the kit, or you can also use a microfiber applicator. Work evenly over the light area to install an even layer. Wait 2 to 8 minutes before stirring and leveling DLight .
- If the light doesn't already have PPF installed, we recommend applying 3 to 4 coats to the light.
- For spotlights that have PPF, you can apply 1 to 2 layers of protection.
- Wait 30 minutes between each layer.