CQUARTZ DLUX Plastic & Wheel Ceramic Coating

DLUX is one of the best options for protecting exterior plastics, especially in our sunny environment in Puerto Rico. This coating leaves a thicker layer (compared to other CQUARTZ coatings) on the surface.

Kit Includes:

• ( 1 ) 30 or 100 ml bottle
• ( 1 ) CARPRO applicator
• ( 4 ) microfiber suede towel  4"x4"
• ( 2 ) CQUARTZ "stickers"

Preparation for the surface you want to protect :

1. Work on a cold surface
2. Clean the surface thoroughly. We recommend a cleaner like Multi X or Multi Clean . If you need more cleaning power on plastics, use ReTyre . For rims, use IronX to decontaminate them.
3. Use Eraser to remove any residue on the surface you are working on.
4. Wait about 20 minutes for the Eraser residue to evaporate.

Apply to plastics:

1. Moisten the applicator with a line of DLUX and spread it evenly over a small area at a time. You can also use a microfiber applicator.
2. When applying it, it is VERY important to work in an even area.
3. Don't cover a large area at once. DLUX dries or "flashes" fairly quickly in Puerto Rico's hot and humid environment. Don't try to spread it too thin, but be sure to apply an even layer within the first minute before moving on to the next layer. 
4. Remove with a microfiber cloth. Approximately 30 seconds to one minute after application.

NOTE:

• It can be applied with an air compressor gun or air brush.
• With more experience, on some textured surfaces, you can apply it without having to remove the excess.
• It can be applied on matte or satin rings.