DQUARTZ Go Nano Diamond Coating

Just one coat will blow you away with years of protection, pearls, shine, and ease of maintenance!

Get ready for the most powerful automotive protection to hit the market to date! DQUARTZ GO is poised to redefine the limits of vehicle surface protection. Bugs, dirt, UV rays... none of that stands a chance with DQ GO protecting your car.

DQUARTZ GO boasts the ultimate in resistance to all types of abuse and grime. From UV rays to chemical, mineral, acid, alkaline, solvent, and even mechanical wear, DQ Go has gone where no coating has gone before! In fact, even a single coat offers phenomenal benefits!

DQUARTZ GO is an excellent professional-grade coating that has been reformulated to be easier for enthusiasts to use. Generally, sacrifices in durability and hardness must be made to allow ease of use for the enthusiast. This was not the case with DQUARTZ GO . CARPRO even introduced a fluoropolymer-based softening formula that provides a satisfyingly slippery feel once cured!

How to apply or install:

1. Perform normal preparation (washing, decontamination and polishing if necessary).
2. Work in the shade and in a clean environment.
3. Point the bottle away from your face and slowly open it. Then drag one or two lines of product along the applicator.
4. Wrap a 4" microfiber cloth around the black side of the applicator pad or simply use a microfiber applicator like Autofiber or CARPRO .
5. Apply 3 lines or approximately 10 drops to the applicator. Use the applicator on the paint, covering an area approximately 1' x 1'.
6. Wait 3-5 minutes before cleaning (in most environments). 
7. Once it feels slightly sticky, gently wipe it off with a microfiber towel.
8. Make sure to remove all excess residue and only then move on to the next section.
   NOTE: Always test ONE section first and make sure you understand the application before continuing.
9. Turn over or change to a new 4" cloth every 1-2 panels or if debris or dirt is visible.
   1 coat of DQ GO is sufficient, but if you wish to apply an extra coat, you can do so 1 hour after starting the first coat.
10. Repeat the application process starting at the same panel and moving in the same direction around the vehicle.
11. Keep away from the elements for 48 hours for best performance and durability.