HydrO2 Silica Spray Concentrate

HydrO2 is a time-saving product. It creates an instant shine. Simply spray on a wet surface and rinse with a regular hose or pressure washer. HydrO2 is activated upon contact with water.

Dilution :

• For longer life dilute 6:1 (example: in a 32 oz bottle mix 4 oz of Hydro with 26 oz of distilled water).
• A balanced mix is ​​10:1 (example: in a 32 oz bottle you mix 2.9 oz of Hydro with 29.1 oz of distilled water). This means that a 3 oz bottle of Hydro produces 32 oz of mix. This bottle, diluted 10:1, can cover approximately 5 to 8 cars (including glass, paint, and rims).
• Yes, if you like the idea of ​​Hydro, but don't want to dilute the product, you can try Hydro Lite; you don't have to dilute it.
• I recommend diluting only in 32 oz bottles at most, if it's just for car maintenance. If you know you'll use more product in about a month, you can dilute in larger containers.

Instructions:

1. Work in the shade and on a cool surface
2. Wash the vehicle and DO NOT dry. The surface where you will apply Hydro must be wet.
3. Divide the vehicle into smaller sections to work on.
4. Apply with a spray bottle to paint, glass, and plastics. Remember to use a water-based solution and a cool surface.
5. Immediately after applying the product to a section (you can wait a maximum of 30 seconds), rinse the surface with water. Observe that a foam forms and the water begins to slide off the surface. It's important to keep in mind that when you spray the product, it may fall on another nearby section; this means you need to rinse the area around the area where you applied it. (For example, if you apply the product to a front fender, it's very likely that the wind will cause the product to fall on the bonnet. You should rinse both the bonnet and the fender.)
6. Repeat the process of applying and rinsing the surface until the entire vehicle is finished.
7. Then dry the car. You'll notice the surface's shine and smoothness. If you notice any stains or residue from the product, you can apply the same Hydro mixture to a microfiber cloth and wipe off the residue. I've also tried using Echo with great success to remove residue.